Auto Body Dent Puller Kit for Car Dent Removal

Product Description

Step 1: Begin by thoroughly cleaning the surface of the dent to ensure optimal adhesion.

Step 2: Insert the glue sticks into the glue gun and power it on to heat. Allow the glue gun to preheat for approximately 5-10 minutes.

Step 3: Select a Glue Puller Tab based on the size of the dent. Apply the heated glue onto the puller tab and immediately center it on the dent, holding it in place until it adheres properly.

Step 4: Allow the glue to cool for roughly 5-8 minutes. It’s important to keep the cooling time under 10 minutes, and slightly reduce this duration during the winter months.

Step 5: Once the glue has cooled, utilize either a golden dent lifter or a bridge puller to align the tool and gently press it, pulling the dent upwards. Repeat this process as necessary until the dent is no longer visible.

Step 6: After the dent has been repaired, clean any remaining glue on the vehicle and puller tabs using alcohol or hot water. In cases where the repair is unsuccessful, don’t hesitate to repeat the steps until you achieve the desired result.

Helpful Tips:
If any raised areas remain on the repaired surface, follow these methods:
1. Gently press the raised area back and forth with your thumb until the surface levels out.
2. If thumb pressure does not flatten the raised spot, try using a leveling pen in the usual grip position, tapping it gently with a rubber hammer until the area smooths out. If the first attempt doesn’t produce results, you can repeat this process as many times as needed for successful repair. (Remember to control your striking force while tapping to avoid damaging the area.)

Conditions Not Suitable for Repair:
1. This tool should not be used on vehicles that have been recently painted, broken, or severely scratched/cracked, as the glue may peel off the paint.
2. Dents that resemble narrow strips cannot be addressed, as the traction pads will not properly bond to them.
3. Additionally, this product is not designed for repairs involving spinal-shaped cracks in metal surfaces.

Package Includes:
- 1 x Silver bridge dent puller
- 7 x Dent Puller Tabs
- 1 x Mini Hot Melt Glue Gun
- 5 x Black hot melt glue sticks
- 5 x Yellow hot melt glue sticks
- 2 x Rubber Scrapers
- 1 x Alcohol Spray Bottle
- 1 x Black cloth

Versatile Application:
This dent puller is effective for most types of dents, including door dings and hail damage. It can be used on automobiles, refrigerators, washing machines, and other metal surfaces. However, it's crucial to note that this dent puller is designed for thin metal surfaces, and it’s not suitable for metal exceeding 3mm in thickness. It works best on dent areas ranging from 1.2 inches to 3.9 inches.

Ergonomic Design:
The dent puller employs the principle of leverage for ease of use. Its unique, arched bridge design allows for spacing adjustments and features a rotatable button for better alignment with the dent, making the process both effective and labor-efficient.

Customer Support:
We prioritize customer satisfaction. Should you have any inquiries or require assistance, please contact us, and we will respond within 24 hours. If the product does not perform as expected, customers can choose to receive either a refund or replacement.

Important Reminder:
Before use, please read the product instructions and manuals carefully. This product is not suitable for spinal-shaped cracks in metal surfaces. Don’t hesitate to reach out with any questions or concerns.

product information: